English
Language : 

LTC3577_15 Datasheet, PDF (6/54 Pages) Linear Technology – Highly Integrated 6-Channel Portable PMIC
LTC3577/LTC3577-1
ELECTRICAL CHARACTERISTICS I2C Interface. The l denotes the specifications which apply over the full
operating temperature range, otherwise specifications are at TA = 25°C. DVCC = 3.3V, VOUT = 3.8V, unless otherwise noted.
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
DVCC
IDVCC
Input Supply Voltage
DVCC Supply Current
SCL = 400kHz
SCL = SDA = 0kHz
1.6
5.5
V
1
μA
0.4
μA
VDVCC,UVLO DVCC UVLO
VIH
Input HIGH Voltage
VIL
Input LOW Voltage
IIH
Input HIGH Leakage Current
SDA = SCL = DVCC = 5.5V
IIL
Input LOW Leakage Current
SDA = SCL = 0V, DVCC = 5.5V
VOL
SDA Output LOW Voltage
ISDA = 3mA
Timing Characteristics (Note 8) (All Values are Referenced to VIH and VIL)
fSCL
SCL Clock Frequency
tLOW
LOW Period of the SCL Clock
tHIGH
HIGH Period of the SCL Clock
tBUF
Bus Free Time Between Stop and Start Condition
tHD,STA
Hold Time After (Repeated) Start Condition
tSU,STA
Setup Time for a Repeated Start Condition
tSU,STO
Stop Condition Setup Time
tHD,DATO
Output Data Hold Time
tHD,DATI
Input Data Hold Time
tSU,DAT
Data Setup Time
tSP
Input Spike Suppression Pulse Width
1.0
V
50
70
%DVCC
30
50
%DVCC
–1
1
μA
–1
1
μA
0.4
V
400
kHz
1.3
μs
0.6
μs
1.3
μs
0.6
μs
0.6
μs
0.6
μs
0
900
ns
0
ns
100
ns
50
ns
Step-Down Switching Regulators. The l denotes the specifications which apply over the full operating temperature range,
otherwise specifications are at TA = 25°C. VOUT = VIN12 = VIN3 = 3.8V, all regulators enabled unless otherwise noted.
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX UNITS
Step-Down Switching Regulators (Buck1, Buck2 and Buck3)
VIN12, VIN3 Input Supply Voltage
(Note 9)
l 2.7
5.5
V
VOUT UVLO
VOUT Falling
VOUT Rising
VIN12 and VIN3 Connected to VOUT Through
2.5
2.7
V
Low Impedance. Switching Regulators are
Disabled Below VOUT UVLO
2.8
2.9
V
fOSC
Oscillator Frequency
1.91
2.25
2.59
MHz
800mA Step-Down Switching Regulator 3 (Buck3 – Pushbutton Enabled, Third in Sequence)
IVIN3Q
Pulse-Skipping Mode Input Current
Burst Mode Operation Input Current
(Note 10)
(Note 10)
100
μA
17
μA
Shutdown Input Current
0.01
μA
ILIM3
Peak PMOS Current Limit
VFB3
Feedback Voltage
(Note 7)
Pulse-Skipping Mode
Burst Mode Operation
1000
1400
1700
mA
l 0.78
0.8
0.82
V
l 0.78
0.8
0.824
V
IFB3
FB3 Input Current
D3
Max Duty Cycle
(Note 10)
FB3 = 0V
–0.05
100
0.05
μA
%
RP3
RDS(ON) of PMOS
RN3
RDS(ON) of NMOS
0.3
Ω
0.4
Ω
3577fa
6