LTC3717 Datasheet, PDF (19/20 Pages) Linear Technology – Wide Operating Range, No RSENSE Step-Down Controller for DDR/QDR Memory Termination

PACKAGE DESCRIPTIO
LTC3717
GN Package
16-Lead Plastic SSOP (Narrow .150 Inch)
(Reference LTC DWG # 05-08-1641)
.254 MIN
.045 ±.005
.150 – .165
.189 – .196*
(4.801 – 4.978)
16 15 14 13 12 11 10 9
.009
(0.229)
REF
.229 – .244
(5.817 – 6.198)
.150 – .157**
(3.810 – 3.988)
.0165 ± .0015
.0250 TYP
RECOMMENDED SOLDER PAD LAYOUT
.007 – .0098
(0.178 – 0.249)
.015 ± .004
(0.38 ± 0.10)
× 45°
0° – 8° TYP
1 234 5678
.053 – .068
(1.351 – 1.727)
.004 – .0098
(0.102 – 0.249)
.016 – .050
(0.406 – 1.270)
NOTE:
1. CONTROLLING DIMENSION: INCHES
2.
DIMENSIONS
ARE
IN
INCHES
(MILLIMETERS)
3. DRAWING NOT TO SCALE
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
.008 – .012
(0.203 – 0.305)
.0250
(0.635)
BSC
GN16 (SSOP) 0502
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-
tation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
sn3717 3717fs
19