U3606A Datasheet, PDF (2/14 Pages) Keysight Technologies – Multimeter|DC Power Supply

The 30-W DC power supply
The 30-W DC power supply provides
a dual-range output of 30 V/1 A
and 8 V/3 A, with an excellent load
regulation of up to 0.01%+3 mV. The
power supply adds overvoltage and
overcurrent load protection (OVP and
OCP), a built-in square-wave genera-
tor, and auto scan and ramp for multi-
level DC bias testing. Remote sensing
capability further ensures accurate
supply of power at load end.
Square-wave generator
Square-wave output is a unique
function for many applications, such
as pulse-width modulation (PWM)
output, adjustable voltage control,
and synchronous clock (baud rate
generator). You can also use this
function to check and calibrate flow-
meter displays, counters, tachom-
eters, oscilloscopes, frequency
converters, frequency transmitters,
and other frequency input devices.
The U3606A’s square-wave output
provides selectable frequencies up to
4.8 kHz with variable duty cycles and
amplitudes.
Sweep functions
Sweep functions in the U3606A are
auto ramp and scan outputs for low-
speed multilevel DC bias tests, such
as margin tests, power cycling tests
and relay control. Both functions are
conveniently configurable from the
front panel to sweep up to 100 steps
for scan and 10,000 steps for ramp,
programmable to 105% of full scale.
Auto scan output
Amplitude (V/A)
Amplitude
end position
Number
of steps
0
Scan dwelling time
Total dwelling time
Auto ramp output
Amplitude (V/A)
Amplitude
end position
Number of steps
0
Total dwelling time
2
Time (t)
Time (t)