ISL33001 Datasheet, PDF (6/19 Pages) Intersil Corporation – I2C Bus Buffer with Rise Time Accelerators and Hot Swap Capability

ISL33001, ISL33002, ISL33003
Electrical Specifications
V_EN = V_CC1, V_CC1 = +2.3V to +5.5V, V_CC2 = +2.3V to +5.5V, unless otherwise noted (Note 8).
Boldface limits apply over the operating temperature range,
-40°C to +85°C. (Continued)
PARAMETER
SYMBOL
CONDITIONS
TEMP MIN
(°C) (Note 9)
TYP
MAX
(Note 9) UNITS
TIMING CHARACTERISTICS
SCL/SDA Propagation
t_PHL
C_LOAD = 100pF, 2.7kΩ to V_CC1 on SDA +25
0
Delay High to Low
and SCL pins, V_CC1 = 3.3V; V_CC2 = 3.3V,
ISL33002 and ISL33003 (Figure 5)
27
100
ns
SCL/SDA Propagation
t_PLH
C_LOAD = 100pF, 2.7kΩ to V_CC1 on SDA +25
0
Delay Low to High
and SCL pins, V_CC1 = 3.3V; V_CC2 = 3.3V,
ISL33002 and ISL33003 (Figure 5)
2
26
ns
NOTES:
8. The algebraic convention, whereby the most negative value is a minimum and the most positive a maximum, is used in this
data sheet.
9. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established
by characterization and are not production tested.
10. Typical value determined by design simulations. Parameter not tested.
11. Buffer is in the connected state.
12. ISL33002 and ISL33003 limits established by characterization. Not production tested.
6
FN7560.2
September 30, 2010