82C59A_06 Datasheet, PDF (22/22 Pages) Intersil Corporation – CMOS Priority Interrupt Controller

82C59A
Die Characteristics
METALLIZATION:
Type: Si-Al-Cu
Thickness: Metal 1: 8kÅ ± 0.75kÅ
Metal 2: 12kÅ ± 1.0kÅ
GLASSIVATION:
Type: Nitrox
Thickness: 10kÅ ± 3.0kÅ
Metallization Mask Layout
82C59A
D0
D1
D2
D3
D4
D5
D6
CAS0
CAS1
GND
CAS2
SP/EN
INT
IR0
D7
RD
WR
CS
V_CC
A0
INTA
IR1
IR2 IR3
IR4
IR5
IR6
IR7
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
22
FN2784.5
March 17, 2006