82C59A_06 Datasheet, PDF (17/22 Pages) Intersil Corporation – CMOS Priority Interrupt Controller

82C59A
Absolute Maximum Ratings
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +8.0V
Input, Output or I/O Voltage . . . . . . . . . . . . . GND-0.5V to V_CC+0.5V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class I
Operating Conditions
Operating Voltage Range. . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V
Operating Temperature Range
CX82C59A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0^oC to 70^oC
IX82C59A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40^oC to 85^oC
MX82C59A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55^oC to 125^oC
Input Low Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to +0.8V
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
CERDIP Package. . . . . . . . . . . . . . . . .
55
12
CLCC Package. . . . . . . . . . . . . . . . . . .
65
14
PDIP Package*. . . . . . . . . . . . . . . . . . .
55
N/A
PLCC Package. . . . . . . . . . . . . . . . . . .
65
N/A
Storage Temperature Range . . . . . . . . . . . . . . . . . . -65°C to +150°C
Maximum Junction Temperature Ceramic Package. . . . . . . . +175°C
Maximum Junction Temperature Plastic Package . . . . . . . . . +150°C
Maximum Lead Temperature Package (Soldering 10s). . . . . +300°C
(PLCC - Lead Tips Only)
*Pb-free PDIPs can be used for through hole wave solder processing
only. They are not intended for use in Reflow solder processing
applications.
Die Characteristics
Gate Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1250 Gates
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
DC Electrical Specifications V_CC = +5.0V ±10%, T_A = Operating Temperature Range
SYMBOL
PARAMETER
MIN
MAX UNITS
TEST CONDITIONS
V_lH
Logical One Input Voltage
2.0
-
2.2
V
C82C59A, I82C59A
V
M82C59A
V_IL
V_OH
V_OL
II
IO
ILIR
Logical Zero Input Voltage
Output HIGH Voltage
Output LOW Voltage
Input Leakage Current
Output Leakage Current
IR Input Load Current
lCCSB Standby Power Supply Current
-
3.0
VCC -0.4
-
-1.0
-10.0
-
-
-
0.8
-
0.4
+1.0
+10.0
-200
10
10
V
V
I_OH = -2.5mA
V
l_OH = -100µA
V
l_OL = +2.5mA
µA
V_IN = GND or V_CC, Pins 1-3, 26-27
µA
V_OUT = GND or V_CC, Pins 4-13, 15-16
µA
V_IN = 0V
µA
V_IN = V_CC
µA
V_CC = 5.5V, V_IN = V_CC or GND Outputs
Open, (Note 1)
ICCOP Operating Power Supply Current
NOTES:
-
1
mA/MHz V_CC = 5.0V, V_IN = V_CC or GND, Outputs Open,
T_A = 25°C, (Note 2)
1. Except for IR0 - lR7 where V_IN = V_CC or open.
2. ICCOP = 1mA/MHz of peripheral read/write cycle time. (ex: 1.0µs I/O read/write cycle time = 1mA).
Capacitance T_A = +25°C
SYMBOL
PARAMETER
CIN
Input Capacitance
COUT Output Capacitance
CI/O I/O Capacitance
TYP
UNITS
TEST CONDITIONS
15
pF
FREQ = 1MHz, all measurements reference to
15
pF
device GND.
15
pF
AC Electrical Specifications V_CC = +5.0V ±10%, GND = 0V, T_A = Operating Temperature Range
5MHz
8MHz
12.5MHz
SYMBOL
PARAMETER
MIN MAX MIN MAX MIN MAX
TIMING REQUIREMENTS
(1) TAHRL A0/CS Setup to RD/INTA
10
-
10
-
5
-
(2) TRHAX A0/CS Hold after RD/INTA
5
-
5
-
0
-
(3) TRLRH RD/lNTA Pulse Width
235
-
160
-
60
-
UNITS
ns
ns
ns
TEST
CONDITIONS
17
FN2784.5
March 17, 2006