X28C512_06 Datasheet, PDF (20/21 Pages) Intersil Corporation – 5V, Byte Alterable EEPROM

X28C512, X28C513
Plastic Leaded Chip Carrier Packages (PLCC)
0.042 (1.07)
0.048 (1.22)
0.042 (1.07)
PIN (1)
0.056 (1.42)
IDENTIFIER
0.050 (1.27) TP
CL
ND
0.004 (0.10) C
0.025 (0.64)
0.045 (1.14)
R
D2/E2
E1 E ^CL
D2/E2
NE
VIEW “A”
0.020 (0.51) MAX
3 PLCS
D1
D
0.050 (1.27)
MIN
0.015 (0.38)
MIN
A1
A
-C-
SEATING
PLANE
0.026 (0.66)
0.032 (0.81)
0.025 (0.64)
MIN
0.013 (0.33)
0.021 (0.53)
(0.12)
0.005 ^{M A S - B S D S}
VIEW “A” TYP.
N32.45x55 (JEDEC MS-016AE ISSUE A)
32 LEAD PLASTIC LEADED CHIP CARRIER PACKAGE
INCHES
MILLIMETERS
SYMBOL MIN
MAX
MIN
MAX NOTES
A
0.125 0.140 3.18
3.55
-
A1
0.060 0.095 1.53
2.41
-
D
0.485 0.495 12.32 12.57
-
D1
0.447 0.453 11.36 11.50
3
D2
0.188 0.223 4.78
5.66
4, 5
E
0.585 0.595 14.86 15.11
-
E1
0.547 0.553 13.90 14.04
3
E2
0.238 0.273 6.05
6.93
4, 5
N
28
28
6
ND
7
7
7
NE
9
9
7
NOTES:
Rev. 0 7/98
1. Controlling dimension: INCH. Converted millimeter dimen-
sions are not necessarily exact.
2. Dimensions and tolerancing per ANSI Y14.5M-1982.
3. Dimensions D1 and E1 do not include mold protrusions. Al-
lowable mold protrusion is 0.010 inch (0.25mm) per side.
Dimensions D1 and E1 include mold mismatch and are mea-
sured at the extreme material condition at the body parting
line.
4. To be measured at seating plane -C- contact point.
5. Centerline to be determined where center leads exit plastic
body.
6. “N” is the number of terminal positions.
7. ND denotes the number of leads on the two shorts sides of the
package, one of which contains pin #1. NE denotes the num-
ber of leads on the two long sides of the package.
20
FN8106.2
June 7, 2006