English
Language : 

ISL6123_07 Datasheet, PDF (1/21 Pages) Intersil Corporation – Power Sequencing Controllers
®
Data Sheet
ISL6123, ISL6124, ISL6125,
ISL6126, ISL6127, ISL6128, ISL6130
February 5, 2007
FN9005.8
Power Sequencing Controllers
The Intersil ISL6123, ISL6124, ISL6125, ISL6126, ISL6127,
ISL6128 and ISL6130 are integrated four channel
controlled-on/controlled-off power-supply sequencers with
supply monitoring, fault protection and a “sequence
completed” signal (RESET#). For larger systems, more than
four supplies can be sequenced by simply connecting a wire
between SYSRESET# pins of cascaded IC's. The ISL6125
uses four open-drain outputs to control the on/off sequencing
of four supplies, while the other sequencers use a patented,
micropower 7X charge pump to drive four external low-cost
NFET switch gates above the supply rail by 5.3V. These IC's
can be biased from any supply 5V down to 1.5V. Individual
product descriptions follow.
The four channel ISL6123 (ENABLE input), ISL6124
(ENABLE# input) and ISL6125 ICs offer the designer 4 rail
control when it is required that all four rails are in minimal
compliance prior to turn on and that compliance must be
maintained during operation. The ISL6123 and ISL6130
have a low power standby mode when disabled, suitable for
battery powered applications.
The ISL6125 operates like the ISL6124 but instead of
charge pump driven gate drive outputs it has open drain
logic outputs for direct interface to other circuitry.
In contrast to the majority, for both the ISL6126 and ISL6130
each of the four channels operates independently so that the
various GATEs will turn on once its individually associated
input voltage requirements are met.
The ISL6127 is a pre programmed A-B-C-D turn-on and
D-C-B-A turn-off sequenced IC. Once all inputs are in
compliance and ENABLE is asserted the sequencing starts
and each subsequent GATE will turn-on after the previous
one completes turning-on.
The ISL6128 has two groups of two channels each with its
independent I/O and is ideal for voltage sequencing into
redundant capability loads as all four inputs need to be
satisfied prior to turn on but a single group fault is ignored by
the other group.
External resistors provide flexible voltage threshold
programming of monitored rail voltages. Delay and
sequencing are provided by external capacitors for both
ramp up and ramp down.
Additional I/O is provided indicating and driving RESET state
in various configurations.
For volume applications, other programmable options and
features can be had. Contact the factory with your needs.
Features
• Enables arbitrary turn-on and turn-off sequencing of up to
four power supplies (0.7V to 5V)
• Operates from 1.5V to 5V supply voltage
• Supplies VDD +5.3V of charge pumped gate drive
• Adjustable voltage slew rate for each rail
• Multiple sequencers can be daisy-chained to sequence an
infinite number of independent supplies
• Glitch immunity
• Under voltage lockout for each supply
• 1µA Sleep State (ISL6123, ISL6130)
• Active high (ISL6123, ISL6130) or low (ISL6124, ISL6125,
ISL6126, ISL6127, ISL6128) ENABLE# input
• Open drain version available (ISL6125)
• Voltage Determined Sequence (ISL6126, ISL6130)
• Pre-programmed Sequence available (ISL6127)
• Dual channel groupings (ISL6128)
• QFN package with Pb-free plus anneal option (RoHS
compliant)
Applications
• Graphics cards
• FPGA/ASIC/microprocessor/PowerPC supply sequencing
• Network routers
• Telecommunications systems
Pinout
ISL6123, ISL6124, ISL6125,
ISL6126, ISL6127, ISL6128, ISL6130
(24 LD QFN)
TOP VIEW
24 23 22 21 20 19
ENABLE/
ENABLE# 1
18 DLY_OFF_A
GATE_A 2
17 UVLO_C
DLY_OFF_C 3
DLY_OFF_D 4
4mmx4mm
16 DLY_ON_C
15 DLY_ON_D
GATE_B 5
14 UVLO_D
GATE_C 6
13 DLY_OFF_B
7 8 9 10 11 12
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2001, 2003-2007. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.