ISL54100_14 Datasheet, PDF (1/21 Pages) Intersil Corporation – TMDS Regenerators with Multiplexers

NOITSLR5E4C10O0MAM, _{IESNLSD5E4EE1}^{®D0T1FHAOERANN}_DDEa^W_tISaL^KD_S5^eE_h^4yS_e^1IF_e^0Ge2_t^NaAtSures
ISL54100, ISL54101, ISL54102
June 4, 2008
FN6275.5
TMDS Regenerators with Multiplexers
The ISL54100, ISL54101, ISL54102 are high-performance
TMDS (Transition Minimized Differential Signaling) timing
regenerators and multiplexers. The receiver contains a
programmable equalizer and a clock data recovery (CDR)
function for each of the 3 TMDS pairs in an HDMI or DVI
signal. The TMDS data outputs of the ISL54100 are
regenerated and perfectly aligned to the regenerated
TMDS clock signal, creating an extremely clean, low-jitter
DVI/HDMI signal that can be easily decoded by any TMDS
receiver.
The ISL54100’s design and package footprint supports
many compound configurations. Two ISL54100s can create
a DualLink 4:1 mux, a 4:2 crosspoint, or an 8:1 mux.
Additional ISL54100s can create larger combinations of
these building blocks. The ISL54102 with its 2:1
multiplexing function serves applications with fewer inputs,
while the ISL54101 can be used as a cable extender, to
clean up a noisy/jittery TMDS source, or to provide a very
stable TMDS signal to a marginal DVI or HDMI receiver.
Certified HDMI 1.3a compliant by the HDMI ATC for the
following features: 12 bit Deep Color (1080i/720p
guaranteed, 1080p typical), x.v.Color™, and all HDMI1.3
audio formats and options.
Block Diagrams
Features
• ISL54100: 4:1 TMDS regenerator and multiplexer
• ISL54101: 1:1 TMDS regenerator
• ISL54102: 2:1 TMDS regenerator and multiplexer
• Clock Data Recovery and Retiming function enables use
as TMDS range extender
• Programmable pre-emphasis on output driver
• Channel activity detect based on input TMDS clock activity
• Symmetrical pinout enables high-performance DualLink,
4:2 crosspoint and 8:1 multiplexing options
• Programmable internal 50Ω, 100Ω, or high-Z termination
• External pins for channel select, activity detection
• Stand-alone or I²C software-controlled operation
• Hardware, software, or automatic channel selection
• Pb-free (RoHS compliant)
Applications
• KVM switches
• A/V receivers
• DVI/HDMI extenders
• Televisions/PC monitors/projectors
TMDS IN (A) ^4X2
TMDS IN (B) ^4X2
TMDS IN (C) ^4X2
TMDS IN (D) ^4X2
RECOVERY AND
REGENERATION
TMDS TX
4X2
TMDS OUT
ISL54100
TMDS IN ^4X2
TMDS IN (A) ^4X2
TMDS IN (B) ^4X2
1
RECOVERY AND
REGENERATION
TMDS TX
4X2
TMDS OUT
ISL54101
RECOVERY AND
REGENERATION
TMDS TX
4X2
TMDS OUT
ISL54102
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006-2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.