82563EB Datasheet, PDF (7/52 Pages) Intel Corporation – Intel® 82563EB/82564EB Gigabit Ethernet Controllers

82563EB/82564EB Gigabit Platform LAN Connect Networking Silicon
1.0
1.1
1.2
Introduction
The Intel® 82563EB Gigabit Platform LAN Connect is a dual, compact Physical Layer
Transceiver (PHY) component designed for 10/100/1000 Mb/s operation. This device uses the
Kumeran interface port of the 631xESB/632xESB I/O Controller Hub enabling the routing of long
distances up to 28 inches (~711 mm). The 82564EB Gigabit Platform LAN Connect is the single
port implementation. The Intel® 82563EB and 82564EB allow for Gigabit Ethernet
implementations in a very small package; easing routing constraints from the 631xESB/632xESB
I/O Controller Hub to the PHY.
The Intel® 82563EB/82564EB devices are based upon proven PHY technology integrated into
Intel’s Gigabit Ethernet Controllers. The physical layer circuitry provides a standard IEEE 802.3
Ethernet interface for 1000BASE-T, 100BASE-TX, and 10BASE-T applications (802.3, 802.3u,
and 802.3ab). The 82563EB/82564EB devices are capable of transmitting and receiving data at
rates of 1000 Mb/s, 100 Mb/s, or 10 Mb/s.
Document Scope
This document contains datasheet specifications for the 82563EB/82564EB Gigabit Platform LAN
Connect, including signal descriptions, DC and AC parameters, packaging data, and pinout
information.
Reference Documents
This document assumes that the designer is acquainted with high-speed design and board layout
techniques. The following documents provide application information:
• 82563EB/82564EB LAN on Motherboard Design Guide (AP-467), Intel Corporation.
• 82563EB/82564EB Gigabit Platform LAN Connect Specification Update, Intel Corporation.
• 631xESB/632xESB I/O Controller Hub EEPROM Information Guide Application Note (AP-
477), Intel Corporation.
• 82571/82572/ESB2 LAN System Manageability Application Note (AP-497), Intel Corporation.
• IEEE Standard 1149.1, 2001 Edition (JTAG). Institute of Electrical and Electronics Engineers
(IEEE).
• IEEE Standard 802.3, 2002 Edition. Incorporates various IEEE Standards previously
published separately. Institute of Electrical and Electronic Engineers (IEEE).
• Intel® 631xESB/632xESB I/O Controller Hub External Design Specification (EDS), Volumes
1-3, Intel Corporation.
• Bensley/Bensley-VS Platform Design Guide (PDG), Intel Corporation.
• PICMG3.1 Ethernet/Fiber Channel Over PICMG 3.0 Draft Specification, September 4, 2002,
Version 0.90. PCI Industrial Computer Manufacturers Group (PICMG).
Software driver developers should contact their local Intel Representatives for programming
information.
1