82562GT Datasheet, PDF (7/46 Pages) Intel Corporation – 10/100 Mbps Platform LAN Connect (PLC)

1.0
1.1
1.2
1.3
Networking Silicon — 82562GT
Introduction
This document is applicable to the Intel^® 82562GT 10/100 Mbps Platform LAN Connect device, a
member of the 82562G Fast Ethernet device family.
Overview
The Intel^® 82562GT 10/100 Mbps Platform LAN Connect is a highly-integrated device designed
for 10 or 100 Mbps Ethernet systems. It is based on the IEEE 10BASE-T and 100BASE-TX
standards. The IEEE 802.3u standard for 100BASE-TX defines networking over two pairs of
Category 5 unshielded twisted pair cable or Type 1 shielded twisted pair cable.
The 82562GT complies with the IEEE 802.3u Auto-Negotiation standard and the IEEE 802.3x Full
Duplex Flow Control standard. The 82562GT also includes a PHY interface compliant to the
current platform LAN connect interface.
References
• IEEE 802.3 Standard for Local and Metropolitan Area Networks, Institute of Electrical and
Electronics Engineers.
• 82562ET(EM) and 82562GT(G) LAN on Motherboard Design Guide. Intel Corporation.
• Intel^® I/O Controller Hub 6 (ICH6) Family External Design Specification (EDS), Volume 1,
Revision 1.5V1. Intel Corporation.
• Intel^® I/O Controller Hub 6 (ICH6) Family External Design Specification (EDS), Volume 2,
Revision 1.5V2. Intel Corporation.
• LAN Connect Interface Specification. Intel Corporation.
• I/O Control Hub 2, 3, and 4 EEPROM Map and Programming Information. Intel Corporation.
• I/O Control Hub 5, 6, and 7 EEPROM Map and Programming Information. Intel Corporation.
Programming information can be obtained through your local Intel representatives.
Product Codes
The product ordering code for the 82562GT is: EP82562GT.
The product ordering code for the 82562GT lead-free version is: EP82562GT.
Datasheet
1