82562GT Datasheet, PDF (39/46 Pages) Intel Corporation – 10/100 Mbps Platform LAN Connect (PLC)

Networking Silicon — 82562GT
Table 14. 10BASE-T Receiver
Symbol
Parameter
Condition
R_ID10
V_IDA10
V_IDR10
V_ICM10
Input Differential
Resistance
Input Differential
Accept Peak
Voltage
Input Differential
Reject Peak
Voltage
Input Common
Mode Voltage
DC
5 MHz ≤ f ≤ 10 MHz
5 MHz ≤ f ≤ 10 MHz
Min Typical Max
10
Units Notes
KΩ
1
585
3100 mV
300
mV
V_CC/2
V
NOTES:
1. The input differential resistance is measured across the receive differential pins, RDP and RDN.
8.2.5
100BASE-TX Voltage and Current DC Specifications
Table 15. 100BASE-TX Transmitter
Symbol
Parameter
Condition
V_OD100
Output
Differential Peak
Voltage
R_L = 100 Ω
Min Typical Max Units Notes
0.95
1.0
1.05
V
1
NOTES:Current is measured between the transmit differential pins (TDP and TDN) at 3.3 V.
1. R_L is the resistive load measured across the transmit differential pins, TDP and TDN.
Table 16. 100BASE-TX Receiver
Symbol
Parameter
R_ID100
V_IDA100
V_IDR100
V_ICM100
Input Differential DC
Resistance
Input Differential
Accept Peak
Voltage
Input Differential
Reject Peak
Voltage
Input Common
Mode Voltage
Condition
Min Typical Max
10
Units Notes
KΩ
1
500
1200 mV
100
mV
V_CC/2
V
NOTES:
1. The input differential resistance is measured across the receive differential pins, RDP and RDN.
Datasheet
33