English
Language : 

XC2734X_13 Datasheet, PDF (80/106 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance
XC2734X
XC2000 Family / Value Line
Electrical Parameters
4.7
AC Parameters
These parameters describe the dynamic behavior of the XC2734X.
4.7.1 Testing Waveforms
These values are used for characterization and production testing (except pin XTAL1).
Output delay
Hold time
Output delay
Hold time
0.8 VDDP
0.7 VDDP
Input Signal
(driven by tester)
0.3 VDDP
0.2 VDDP
Output Signal
(measured)
Output timings refer to the rising edge of CLKOUT.
Input timings are calculated from the time, when the input signal reaches
VIH or VIL, respectively.
MCD05556C
Figure 17 Input Output Waveforms
VLoad + 0.1 V
VLoad - 0.1 V
Timing
Reference
Points
VOH - 0.1 V
VOL + 0.1 V
For timing purposes a port pin is no longer floating when a 100 mV
change from load voltage occurs, but begins to float when a 100 mV
change from the loaded VOH /VOL level occurs (IOH / IOL = 20 mA).
MCA05565
Figure 18 Floating Waveforms
Data Sheet
80
V1.5, 2013-02