XC2734X_13 Datasheet, PDF (75/106 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2734X
XC2000 Family / Value Line
Electrical Parameters
4.5
System Parameters
The following parameters specify several aspects which are important when integrating
the XC2734X into an application system.
Note: These parameters are not subject to production test but verified by design and/or
characterization.
Note: Operating Conditions apply.
Table 21 Various System Parameters
Parameter
Symbol
Values
Unit Note /
Min. Typ. Max.
Test Condition
Short-term deviation of Δf_INT CC -1
−
1
% ΔT_J ≤ 10°C
internal clock source
frequency¹⁾
Internal clock source
frequency
f_INT CC 4.8
5.0
5.2
MHz
Wakeup clock source
frequency²⁾
f_WU CC 400 −
210 −
700 kHz FREQSEL= 00
390 kHz FREQSEL= 01
140 −
260 kHz FREQSEL= 10
110 −
200 kHz FREQSEL= 11
Startup time from power- t_SPO CC 1.5
2.0
2.4
ms f_WU= 500 kHz
on with code execution
from Flash
Startup time from stopover t_SSO CC 11 / −
mode with code execution
f_WU3)
from PSRAM
12 / μs
f_WU3)
Core voltage (PVC)
supervision level
V_PVC CC V_LV - V_LV
V_LV + V
5)
0.03
0.07⁴⁾
Supply watchdog (SWD) V_SWD
supervision level
CC
V_LV - V_LV
0.10⁶⁾
V_LV + V
0.15
voltage_range=
lower ⁵⁾
V_LV - V_LV
0.15
V_LV - V_LV
0.30
V_LV + V
0.15
V_LV + V
0.30
voltage_range=
upper ⁵⁾
V_LV = 5.5 V ⁵⁾
1) The short-term frequency deviation refers to a timeframe of a few hours and is measured relative to the current
frequency at the beginning of the respective timeframe. This parameter is useful to determine a time span for
re-triggering a LIN synchronization.
Data Sheet
75
V1.5, 2013-02