XC2734X_13 Datasheet, PDF (78/106 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2734X
XC2000 Family / Value Line
Electrical Parameters
4.6
Flash Memory Parameters
The XC2734X is delivered with all Flash sectors erased and with no protection installed.
The data retention time of the XC2734X’s Flash memory (i.e. the time after which stored
data can still be retrieved) depends on the number of times the Flash memory has been
erased and programmed.
Note: These parameters are not subject to production test but verified by design and/or
characterization.
Note: Operating Conditions apply.
Table 24 Flash Parameters
Parameter
Symbol
Min.
Parallel Flash module N_PP SR −
program/erase limit
−
depending on Flash read
activity
Values
Typ. Max.
−
2¹⁾
−
1²⁾
Unit
Note /
Test Condition
N_{FL_RD}≤ 1
N_{FL_RD}> 1
Flash erase endurance N_SEC SR 10
−
−
cycles t_RET≥ 20 years
for security pages
Flash wait states³⁾
N_WSFLAS 1
−
−
H ^SR
2
−
−
f_SYS≤ 8 MHz
f_SYS≤ 13 MHz
3
−
−
f_SYS≤ 17 MHz
Erase time per
sector/page
4
t_ER CC −
−
−
f_SYS> 17 MHz
7⁴⁾
8.0
ms
Programming time per
page
t_PR CC −
3⁴⁾
3.5
ms
Data retention time
t_RET CC 20
−
−
years N_ER≤ 1,000 cycl
es
Drain disturb limit
N_DD SR 32
−
Number of erase cycles N_ER SR −
−
−
cycles
15.000 cycles t_RET≥ 5 years;
Valid for Flash
module 1 (up to
64 kbytes)
−
−
1.000 cycles t_RET≥ 20 years
1) The unused Flash module(s) can be erased/programmed while code is executed and/or data is read from only
one Flash module or from PSRAM. The Flash module that delivers code/data can, of course, not be
erased/programmed.
Data Sheet
78
V1.5, 2013-02