XC2734X_13 Datasheet, PDF (65/106 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2734X
XC2000 Family / Value Line
Electrical Parameters
4.3.2 DC Parameters for Lower Voltage Area
Keeping signal levels within the limits specified in this table ensures operation without
overload conditions. For signal levels outside these specifications, also refer to the
specification of the overload current I_OV.
Note: Operating Conditions apply.
Table 16 is valid under the following conditions: V_DDP≥ 3.0 V; V_DDPtyp. 3.3 V;
V_DDP≤ 4.5 V
Table 16 DC Characteristics for Lower Voltage Range
Parameter
Symbol
Values
Unit Note /
Min. Typ. Max.
Test Condition
Pin capacitance (digital
inputs/outputs). To be
doubled for double bond
pins.¹⁾
Input Hysteresis²⁾
Absolute input leakage
current on pins of analog
ports³⁾
C_IO CC −
−
HYS CC 0.07 x −
V_DDP
|I_OZ1|
−
10
CC
10
pF not subject to
production test
−
V R_S= 0 Ohm
200 nA V_IN> V_SS ;
V_IN< V_DDP
Absolute input leakage |I_OZ2| −
current for all other pins. CC
To be doubled for double
bond pins.³⁾¹⁾⁴⁾
−
0.2 2.5 μA T_J≤ 110 °C;
V_IN> V_SS ;
V_IN< V_DDP
0.2 8
μA T_J≤ 150 °C;
V_IN> V_SS ;
V_IN< V_DDP
Pull Level Force Current⁵⁾ |I_PLF| SR 150 −
−
μA V_IN≥ V_IHmin(pull
down) ;
V_IN≤ V_ILmax(pull
up)
Pull Level Keep Current⁶⁾ |I_PLK| −
−
10
μA V_IN≥ V_IHmin(pull
SR
up) ;
V_IN≤ V_ILmax(pull
down)
Input high voltage (all
except XTAL1)
Input low voltage
(all except XTAL1)
V_IH SR 0.7 x −
V_DDP
V_IL SR -0.3 −
V_DDP + V
0.3
0.3 x V
V_DDP
Data Sheet
65
V1.5, 2013-02