PTFA081501E Datasheet, PDF (8/10 Pages) Infineon Technologies AG – Thermally-Enhanced High Power RF LDMOS FETs 150 W, 864-900 MHz

PTFA081501E
PTFA081501F
Package Outline Specifications
Package H-30248-2
(45° X 2.72
[.107])
CL
FLANGE 9.78
[.385] _{LID 9.40 +–00..1105 CL}
19.43 ±0.51
[.765±.020]
[.370^{+–..000046} ]
0.0381 [.0015] -A-
1.02
[.040]
D
G
2X 12.70
[.500]
27.94
[1.100]
19.81±0.20
[.780±.008]
CL
34.04
[1.340]
2X 4.83±0.51
[.190±.020]
S
2X R1.63
[.064]
4X R1.52
[.060]
SPH 1.57
[.062]
3.61±0.38
[.142±.015]
248-cases: h- 30248-2_po
Diagram Notes:
1. Lead thickness: 0.10 +0.051/–0.025 [.004 +.002/–.001].
2. All tolerances ± 0.127 [.005] unless specified otherwise.
3. Pins: D = drain, S = source, G = gate.
4. Interpret dimensions and tolerances per ASME Y14.5M-1994.
5. Primary dimensions are mm. Alternate dimensions are inches.
6. Gold plating thickness:
S - flange: 2.54 micron (min) [100 microinch (min)]
D, G - leads: 1.14 micron ± 0.38 micron [45 microinch ± 15 microinch]
Find the latest and most complete information about products and packaging at the Infineon Internet page
http://www.infineon.com/products
Data Sheet
8 of 10
Rev. 03, 2007-03-09