1EDI30J12CP Datasheet, PDF (6/28 Pages) Infineon Technologies AG – 1EDI EiceDRIVER™ Enhanced

EiceDRIVER™ Enhanced
1EDI30J12CP
Pin Configuration and Description
Table 1 Pin Configuration 1EDI30J12CP in PG-DSO-19-4, Wide Body (cont’d)
Pin Symbol Description
15 EN
Driver Enable
17 GND1 Signal Ground Input Side
18 IN
Driver Input
19 VCC1 Positive Supply Input Side
20 N.C.
Internally not connected¹⁾
1) Pads of N.C. pins must be left unconnected, separated from each other and floating for maximum creepage/clearance
distance
2) Connect to JFDrv Pin or leave pin unconnected and floating
Preliminary Datasheet
5
Rev. 1.3, 2014-11-12