XC164CS Datasheet, PDF (54/71 Pages) Infineon Technologies AG – 16-Bit Single-Chip Microcontroller

XC164
Derivatives
Electrical Parameters
5) _{This parameter is determined mainly by the transistor leakage currents. This current heavily depends on the}
junction temperature (see Figure 13). The junction temperature T_J is the same as the ambient temperature T_A
if no current flows through the port output drivers. Otherwise, the resulting temperature difference must be
taken into account.
6) _{All inputs (including pins configured as inputs) at 0 V to 0.1 V or at VDDP - 0.1 V to VDDP, all outputs (including}
pins configured as outputs) disconnected. This parameter is tested at 25 °C and is valid for T_J ≥ 25 °C.
7) _{This parameter is determined mainly by the current consumed by the oscillator switched to low gain mode (see}
Figure 12). This current, however, is influenced by the external oscillator circuitry (crystal, capacitors). The
given values refer to a typical circuitry and may change in case of a not optimized external oscillator circuitry.
Data Sheet
50
V2.1, 2003-06