TDA7210V_10 Datasheet, PDF (38/44 Pages) Infineon Technologies AG – ASK/FSK Single Conversion Receiver

TDA7210V
Electrical Characteristics
Table 11 AC/DC Characteristics with T_AMB= -40°C ... + 85°C, V_CC = 4.5 ... 5.5 V (cont’d)
Parameter
Symbol
Values
Unit Note / Test Condition
Min. Typ. Max.
Output bias current
FSEL
I_FSEL
-110 -200 -340 µA FSEL tied to GND
PLL DIVIDER - Signal CSEL (PIN 15)
f_CRSTL range 6.xxMHz V_CSEL 1.4
–
f_CRSTL range
13.xxMHz
V_CSEL
0
–
4¹⁾
V Or open
0.2
V
Input bias current
CSEL
I_CSEL
-3
-5
-7
µA CSEL tied to GND
1) Maximum voltage in Power-On state is 4 V, but in PDWN-state the maximum voltage is 2.8 V.
Test Number
4.35
4.36
4.37
4.38
Attention: Test ■ means that the parameter is not subject to production test.
It was verified by design/characterization.
4.2
Customer Test Circuit
The device performance parameters marked with ■ in Table 9, Table 10, and Table 11 are not subject to
production test. They were verified by design/characterization. The received signal is accessible on a 2-pole pin
connector and can be used for simple remote-control applications. More information on the board is available on
request.
Data Sheet
38
Revision 1.1, 2010-06-18