TLE8209-2SA Datasheet, PDF (31/38 Pages) Infineon Technologies AG – SPI Programmable H-Bridge

Field
Bits
CONFIG1 6
CONFIG0 5
DIACLR2 4
DIACLR1 3
STATUS2 2
STATUS1 1
STATUS0 0
Type
wr
wr
wr
wr
r
r
r
TLE8209-2SA
SPI Interface
Description
changes thresholds in VDD threshold test mode (CONFIG2=’0’)
’1’: increase lower threshold of VDD monitoring to test switch off path
’0’: decrease upper threshold of VDD monitoring to test switch off path
latch function for overvoltage at VDD
’1’: overvoltage at VDD latched
’0’: overvoltage at VDD not latched
’0’: clears diagnosis of OUT2
always returns ’1’ at read access
’0’: clears diagnosis of OUT1
always returns ’1’ at read access
returns level at ABE
’0’: under voltage at VDD
’1’: VDD voltage above lower limit
0’: over voltage at VDD
’1’: VDD voltage below upper limit
Data Sheet
31
Rev. 1.0, 2010-02-16