TLE5011_11 Datasheet, PDF (31/45 Pages) Infineon Technologies AG – GMR Angle Sensor

Reserved
Addr: 09_H - 0B_H
7
6
Reset Value: 00_H
5
4
3
2
Reserved
TLE5011
Specification
1
0
TST
Addr: 0C_H
7
TEMP_EN
WL
6
ADCPY
WL
Reset Value: 00_H
5
4
3
FILT_PAR
WL
FILT_CRS
WL
FIR_BYP
WL
2
1
TST_ADC
WL
TST_GMR
WL
0
TST_
CHAN
WL
Field
Bits
Type Description
TEMP_EN
7
WL
Temperature Device Enable
0: Temperature Measurement disabled
1: Temperature Measurement enabled
The X value represents the temperature.
Automatic update mode enabled, if AUTO=1
ADCPY
6
WL
Y Polarity
0: No inversion of Y bitstream
1: Inversion of Y bitstream (rotating direct. changed)
FILT_PAR
5
WL
Filter switched parallel
0: Filters in normal mode
1: Filters parallel, input selected by TST_CHAN
FILT_CRS
4
WL
Filter switched across
0: Filters in normal mode
1: Filters crossed, X and Y outputs are exchanged
FIR_BYP
3
WL
FIR Filter Bypass
0: No FIR Bypass
1: FIR Bypass
TST_ADC ¹⁾
2
WL
ADC input switch to TST1and TST2
0: No ADC input switch, normal operation
1: ADC input switched to TST1,2, ADC selected by TST_CHAN ²⁾
TST_GMR ¹⁾
1
WL
GMR switch to TST1and TST2
0: No GMR switch, normal operation
1: GMR switched to TST1,2 selected by TST_CHAN ²⁾
TST_CHAN
0
WL
Test Channel select
0: X channel linked to TST1and TST2
1: Y channel linked to TST1and TST2
1) Only for test purposes
2) if TST_ADC and TST_GMR are set to 1 at the same time, TST_GMR is forced to 0. TST_ADC has the higher priority.
Final Data Sheet
31
V2.0, 2011-03