HYS72T32000GR Datasheet, PDF (3/24 Pages) Infineon Technologies AG – DDR2 Registered DIMM Modules

HYS72Txx0xxGR
Registered DDR2 SDRAM-Modules
1.1 Ordering Information
Type & Partnumber
Compliance Code
Description
SDRAM
Technology
PC2-3200 (DDR2-400):
HYS72T32000GR-5-A
PC2-3200R-33310-A
one rank 256 MB Reg. DIMM
256 Mbit (x8)
HYS72T64020GR-5-A
PC2-3200R-33310-B
two ranks 512 MB Reg. DIMM
256 Mbit (x8)
HYS72T64001GR-5-A
PC2-3200R-33310-C
one ranks 512 MB Reg.DIMM
256 Mbit (x4)
PC2-4200 (DDR2-533):
HYS72T32000GR-3.7-A
PC2-4200R-44410-A
one rank 256 MB Reg. DIMM
256 Mbit (x8)
HYS72T64020GR-3.7-A
PC2-4200R-44410-B
two ranks 512 MB Reg. DIMM
256 Mbit (x8)
HYS72T64001GR-3.7-A
PC2-4200R-44410-C
one ranks 512 MB Reg.DIMM
256 Mbit (x4)
PC2-5300 (DDR2-667):
HYS72T32000GR-3-A
PC2-5300R-44410-A
one rank 256 MB Reg. DIMM
256 Mbit (x8)
HYS72T64020GR-3-A
PC2-5300R-44410-B
two ranks 512 MB Reg. DIMM
256 Mbit (x8)
HYS72T64001GR-3-A
PC2-5300R-44410-C
one ranks 512 MB Reg.DIMM
256 Mbit (x4)
Notes:
1. All part numbers end with a place code, designating the silicon die revision. Example: HYS 72T32000GR-5-A, indicating
Rev. A dies are used for DDR2 SDRAM components. For all INFINEON DDR2 module and component nomenclature see
section 8 of this datasheet.
2. The Compliance Code is printed on the module label and describes the speed grade, f.e. “PC2-4200R-44410-C”, where
4200R means Registered DIMM modules with 4.26 GB/sec Module Bandwidth and “44410” means CAS latency = 4, trcd
latency = 4 and trp latency = 4 using the latest JEDEC SPD Revision 1.0 and produced on the Raw Card “C”.
1.2 Address Format
Part Number
HYS72T32000GR
DIMM
Density
256 MB
Organization
32Mb × 72
Memory
Ranks
1
HYS72T64020GR 512 MB 2 x 32Mb × 72
2
HYS72T64001GR- 512 MB 64Mb x 72
1
DDR2-
SDRAMs
(256Mb)
32Mb × 8
(256Mb)
32Mb × 8
(256Mb)
64Mb × 4
# of # of row/bank/
SDRAMs column bits
9
13/2/10
18
13/2/10
18
13/2/11
INFINEON Technologies
3
2.04