TLE4966V-1K_15 Datasheet, PDF (15/24 Pages) Infineon Technologies AG – In Plane Sensing with Vertical Dual Hall Effect Latch for Automotive Applications

TLE4966V-1K
Specification
3.2
Operating Range
Attention: The following operating conditions must not be exceeded in order to ensure correct operation
of the TLE4966V-1K. All parameters specified in the following sections refer to these operating
conditions unless otherwise mentioned.
Table 3-3 Operating Conditions Parameters
Parameter
Symbol
Values
Unit Note / Test Condition
Min.
Typ.
Max.
Supply voltage
V_DD
3.5
32¹⁾
V
Output voltage
V_Q
-0.3
32
V
Junction temperature
T_j
-40
150
°C
Output current
I_Q
0
10
mA
Magnetic signal input frequency²⁾ f_mag
0
5
kHz
1) Latch-up test with factor 1.5 is not covered. Please see max ratings also.
2) For operation at the maximum switching frequency the magnetic input signal must be 1.4 times higher than for static fields.
This is due to the -3dB corner frequency of the internal low-pass filter in the signal path.
Data Sheet
15
Revision 1.0, 2014-05-13