TC1797 Datasheet, PDF (131/190 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1797
Electrical Parameters
5.1.2 Pad Driver and Pad Classes Summary
This section gives an overview on the different pad driver classes and its basic
characteristics. More details (mainly DC parameters) are defined in the Section 5.2.1.
Table 6
Pad Driver and Pad Classes Overview
Class Power Type Sub Class Speed Load Leakage¹⁾ Termination
Supply
Grade
A
3.3 V LVTTL A1
6 MHz 100 pF 500 nA No
I/O, (e.g. GPIO)
LVTTL _A2
outputs _{(e.g. serial}
40
MHz
50 pF 6 µA
Series
termination
I/Os)
recommended
B
2.375 - LVTTL B1
40
50 pF 6 µA
No
3.6 V²⁾ I/O
(e.g. Ext. MHz
Bus
Interface)
B2
(e.g. Bus
Clock)
75
35 pF
MHz
Series
termination
recommended
(for f > 25 MHz)
F
3.3 V LVDS/ –
CMOS
50
–
–
MHz
Parallel
termination³⁾,
100 Ω ± 10%
DE 5 V
ADC –
–
–
–
see Table 11
1) Values are for T_Jmax = 150 °C.
2) AC characteristics for EBU pins are valid for 2.5 V ± 5% and 3.3 V ± 5%.
3) In applications where the LVDS pins are not used (disabled), these pins must be either left unconnected, or
properly terminated with the differential parallel termination of 100 Ω ± 10%.
Data Sheet
127
V1.1, 2009-04