TLE9869QXA20_15 Datasheet, PDF (106/122 Pages) Infineon Technologies AG – Microcontroller with LIN and H-Bridge MOSFET Driver for Automotive Applications

TLE9869QXA20
Electrical Characteristics
Table 34 Supply Voltage Signal Conditioning (cont’d)
V_S = 5.5 V to 28 V, T_j = -40 °C to +150 °C, all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Parameter
Symbol
Values
Unit Note / Test Condition Number
Min. Typ. Max.
Accuracy of V_DDP sense
after calibration
∆V_{DDP_SENSE} -105 –
105 mV
10-Bit ADC Reference Voltage Measurement V_AREF
Input to output voltage
attenuation:
ATT_VAREF
–
0.219
V_AREF
Nominal operating input V_AREF,range
0
–
voltage range V_AREF
Accuracy of V_AREF sense ∆V_AREF
after calibration
-79 –
–
5.62 V
79 mV
8-Bit ADC Reference Voltage Measurement V_BG
Input-to-output voltage
attenuation:
ATT_VBG
–
0.75
V_BG
Nominal operating input
voltage range V_BG
V_BG,range
0.8 –
Core supply Voltage Measurement V_DDC
Input-to-output voltage
attenuation:
ATT_VDDC
–
0.75
V_DDC
Nominal operating input
voltage range V_DDC
V_DDC,range
0.8 –
Accuracy of V_DDC sense ∆V_{DDC_SENSE} -22 –
after calibration
–
1.64 V
–
1.64 V
22 mV
VDH Input Voltage Measurement V_VDH10BITADC
VDH Input to output
voltage attenuation:
ATT_{VDH_1}
–
0.1666 –
667
2)_{VS = 5.5 to 18V,}
T_j = -40..85°C
–
1)
V_S = 5.5V to 18V,
T_j = -40..85°C
–
1)
–
1)
V_S = 5.5 to 18V,
T_j = -40..85°C
SFR setting 1
P_8.1.5
P_8.1.22
P_8.1.51
P_8.1.48
P_8.1.57
P_8.1.52
P_8.1.34
P_8.1.53
P_8.1.6
P_8.1.64
VDH Input to output
voltage attenuation:
ATT_{VDH_2}
–
0.2260 –
0
SFR setting 2
P_8.1.65
Nominal operating input V_VDH,range1
–
–
30
voltage range V_VDH, Range
1
SFR setting 1
P_8.1.66
Nominal operating input V_VDH,range2
–
–
20
voltage range V_VDH, Range
2
SFR setting 2
P_8.1.67
V_VDH 10-bit ADC, Range 1 ∆V_VDHADC10B -300 –
V_VDH 10-bit ADC, Range 2 ∆V_VDHADC10B -200 –
300 mV V_S= 5.5 to 18V,
T_j = -40..85°C
200 mV V_S= 5.5V to 18V,
T_j = -40..85°C
P_8.1.39
P_8.1.71
Data Sheet
106
Rev. 1.0, 2015-04-30