TLE9869QXA20_15 Datasheet, PDF (105/122 Pages) Infineon Technologies AG – Microcontroller with LIN and H-Bridge MOSFET Driver for Automotive Applications

TLE9869QXA20
Electrical Characteristics
Table 34 Supply Voltage Signal Conditioning (cont’d)
V_S = 5.5 V to 28 V, T_j = -40 °C to +150 °C, all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Parameter
Symbol
Values
Unit Note / Test Condition Number
Min. Typ. Max.
Accuracy of V_{BAT_SENSE} /
V_S after calibration
ΔV_{BAT_SENSE} -370 –
V _,range2 , _S,range2
370 mV SFR setting 2, V_S = 5.5V P_8.1.44
to 18V,
T_j = -40..85°C
Measurement input
leakage current for
V_{BAT_SENSE}
I_{leak_VBAT_SENSE} 0
–
, measure
4.0 µA PD_N=0 (off-state),
V_{BAT_SENSE} = 13.5V
Driver Supply Voltage Measurement V_SD
Input to output voltage
ATT_VSD
–
0.039 –
–
attenuation:
V_SD
Nominal operating input
voltage range V_SD
V_SD,range
2.5 –
31 V ¹⁾
Accuracy of V_SD sense
after calibration
∆V_SD
-440 –
440 mV V_S = 5.5V to 18V,
T_j = -40..85°C
P_8.1.72
P_8.1.21
P_8.1.2
P_8.1.47
Charge Pump Voltage Measurement V_CP
Input to output voltage
ATT_VCP
–
0.023 –
–
attenuation:
V_CP
Nominal operating input
voltage range V_CP
V_CP,range
2.5 –
52 V ¹⁾
Accuracy of V_CP sense
after calibration
∆V_CP
-747 –
747 mV V_S = 5.5V to 18V,
T_j = -40..85°C
P_8.1.56
P_8.1.7
P_8.1.62
Monitoring Input Voltage Measurement
Input to output voltage
attenuation:
V_MON
Nominal operating input
voltage range V_MON
Accuracy of V_MON sense
after calibration
ATT_VMON
V_MON,range
∆V_MON
V_MON
–
2.5
-440
Pad Supply Voltage Measurement V_VDDP
Input-to-output voltage
ATT_VDDP
–
attenuation:
V_DDP
Nominal operating input V_DDP,range
0
voltage range V_DDP
0.039
–
–
0.164
–
–
–
31 V ¹⁾
440 mV V_S = 5.5V to 18V,
T_j = -40..85°C
–
–
7.50 V ¹⁾
P_8.1.49
P_8.1.8
P_8.1.68
P_8.1.33
P_8.1.50
Data Sheet
105
Rev. 1.0, 2015-04-30