PTF180101S Datasheet, PDF (10/10 Pages) Infineon Technologies AG – LDMOS RF Power Field Effect Transistor 10 W, 1805-1880 MHz, 1930-1990 MHz 10 W, 2110-2170 MHz

PTF180101S
Confidential, Limited Internal Distribution
Revision History:
2007-03-01
Previous Version:
2004-02-03
Page
Subjects (major changes since last revision)
all
Update document format
1
Add RoHS-compliant information.
9
Correct package diagram and dimensions.
Data Sheet
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to:
[e-mail]
To request other information, contact us at:
[phone] (1-877-GO-LDMOS) USA
or [phone] International
GOLDMOS^® is a registered trademark of Infineon Technologies AG.
Edition , 2007-03-01
Published by
Infineon Technologies AG
81726 München, Germany
© Infineon Technologies AG 2003.
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics
(“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and
liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third
party.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon
Technologies Office (www.infineon.com/rfpower).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in question
please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of
Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support
device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are
intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it
is reasonable to assume that the health of the user or other persons may be endangered.
Data Sheet
10 of 10
Rev. P03, 2007-03-01