ICS950813 Datasheet, PDF (19/22 Pages) Integrated Circuit Systems – Frequency Generator with 200MHz Differential CPU Clocks

ICS950813
Advance Information
Power Down De-Assertion Mode
The power-up latency needs to be less than 1.8mS. this is the time from the de-asseration of the powerdown of the ramping
of the power supply until the time that stable clocks are output from the clock chip. If the I²C Bit 6 of Byte 0 is programmed
to "1" then the stopped CPU outputs will be driven high within 3 nS of PD# de-asseration.
Test Configuration Diagram
Rs=33 Ohms
5%
CLK408
Rs=33 Ohms
5%
Rp=49.9 Ohms
1%
Rset=475 Ohms
1%
TLA
TLB
Rp=49.9 Ohms
1%
CPUCLKT test
point
CPUCLKC test
point
2pF
2pF
5%
5%
MULTSEL Pin must be High
CPU 0.7V Configuration test load board termination
0708—10/10/02
19