IC-PV Datasheet, PDF (6/28 Pages) IC-Haus GmbH – BATTERY-BUFFERED HALL MULTITURN ENCODER

iC-PV
BATTERY-BUFFERED HALL MULTITURN ENCODER
Rev E2, Page 6/28
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these ratings device damage may occur.
Item Symbol Parameter
No.
Conditions
Min.
Unit
Max.
G001 V(VDD) Supply Voltage at VDD
referenced to GND
-0.3
6
V
G002 V(VBAT) Supply Voltage at VBAT
referenced to GND,
if VDD > Von: VBAT < VDD + 1 V
-0.3
6
V
G003 V(VDDS) Voltage at VDDS
referenced to GND
-0.3
6
V
G004 V()
Voltage at SCL, SDA, DI_P1, CLK_N1, referenced to GND
DO_P0, N0, NERR, P2, N2, PRE, SEL
-0.3
6
V
G005 I(VDD) Current in VDD
-10
50
mA
G006 I(VBAT) Current in VBAT
-10
50
mA
G007 I(VDDS) Current in VDDS
-10
50
mA
G008 I(GND) Current in GND
-50
10
mA
G009 I()
Current in SCL, SDA, DI_P1, CLK_N1,
DO_P0, N0, NERR, P2, N2, PRE, SEL
-30
30
mA
G010 Vd()
ESD Susceptibility at all pins
HBM, 100 pF discharged through 1.5 kΩ
2
kV
G011 Tj
Junction Temperature
-40
150
°C
G012 Ts
Storage Temperature Range
see package specifications
-40
150
°C
THERMAL DATA
Operating conditions: VDD = 3.0...5.5 V; VBAT < VDD + 1 V
Item Symbol Parameter
No.
Conditions
Unit
Min. Typ. Max.
T01 Ta
Operating Ambient Temperature Range Package QFN16
-40
125 ° C
T02 Rthja
Thermal Resistance Chip/Ambience QFN16-3x3 surface mounted to PCB
45
K/W
according to JEDEC 51 thermal measurement
standards
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.