IC-MSA Datasheet, PDF (5/29 Pages) IC-Haus GmbH – SIN/COS SIGNAL CONDITIONER with AGC and 1Vpp DRIVER

iC-MSA SIN/COS SIGNAL
preliminary
CONDITIONER with AGC and 1Vpp DRIVER
Rev A1, Page 5/29
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these ratings device damage may occur.
Item Symbol Parameter
No.
Conditions
Min.
Unit
Max.
G001 V()
Voltage at VDD, GND, PC, NC, PS, NS,
PZ, NZ
-6
6
V
G002 V()
Voltage at ERR
-6
8
V
G003 V()
Pin-To-Pin Voltage between VDD,
GND, PC, NC, PS, NS, PZ, NZ, ERR
6
V
G004 V()
Voltage at X1...X6, SCL, SDA
-0.3 VDDS + V
0.3
G005 I(VDD) Current in VDD
-100
100
mA
G006 I()
Current in VDDS, GNDS
-50
50
mA
G007 I()
Current in X1...X6, SCL, SDA, ERR,
PC, NC, PS, NS, PZ, NZ
-20
20
mA
G008 Vd()
ESD Susceptibility at all pins
HBM 100 pF discharged through 1.5 kΩ
2
kV
G009 Ptot
Permissible Power Dissipation
TSSOP20-TP
400
mW
G010 Tj
Junction Temperature
-40
150
°C
G011 Ts
Storage Temperature Range
-40
150
°C
THERMAL DATA
VDD = 4.3...5.5 V
Item Symbol
No.
T01 Ta
T02 Rthja
Parameter
Conditions
Operating Ambient Temperature Range TSSOP20-TP
Thermal Resistance Chip to Ambient TSSOP20-TP surface mounted to PCB
according to JEDEC 51
Unit
Min. Typ. Max.
-40
115 °C
35
K/W
All voltages are referenced to Pin GNDS unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.