IC-MSB_17 Datasheet, PDF(12/32 Page) IC-Haus GmbH

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

IC-MSB_17 Datasheet, PDF (12/32 Pages) IC-Haus GmbH – SIN/COS SIGNAL CONDITIONER

◁

iC-MSBSAFETY, iC-MSB2

SIN/COS SIGNAL CONDITIONER WITH 1Vpp DRIVER

PROGRAMMING

Rev F3, Page 12/32

Configuration Interface . . . . . . . . . . . . . . . . . . . Page 15

ENFAST: I2C Fast Mode Enable

ENSL:

I2C Slave Mode Enable

DEVID: Device ID of EEPROM providing the chip

configuration data (e.g. 0x50)

CHKSUM: CRC of chip configuration data

(address range 0x00 to 0x1E)

CHPREL: Chip Release

NTRI:

Tristate Function and

Op. Mode Change

Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 17

CFGIBN: Bias Calibration

CFGTA: Temperature Sensor Calibration

Operation Modes . . . . . . . . . . . . . . . . . . . . . . . . . . Page 18

MODE: Operation Mode

ENF:

Signal Filtering

Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seite 19

TMODE: Test Mode Functions

TMEM: Test Mode Memory Selection

Input Configuration and

Signal Path Multiplexer . . . . . . . . . . . . . . . . . . . Page 20

INMODE: Diff./Single-Ended Input Mode

RIN12: I/V Mode and Input Resistance CH1, CH2

BIAS12: Reference Voltage CH1, CH2

RIN0:

I/V Mode and Input Resistance CH0

BIAS0: Reference Voltage CH0

MUXIN: Input-To-Channel Assignment:

X3...X6 to CH1, CH2

INVZ:

Index Signal Inversion

EAZ:

Index Comparator Enable

MUXOUT: Output Multiplexer (iC-MSB2 only)

BIASEX: Input Reference Selection

BYP

Input-to-output Feedthrough

Signal Conditioning CH1, CH2 (X3...X6) . . Page 24

GR12: Gain Range CH1, CH2 (coarse)

GF1:

Gain Factor CH1 (fine)

GF2:

Gain Factor CH2 (fine)

VOS12: Offset Reference Source CH1, CH2

VDC1: Intermediate Voltage CH1

VDC2: Intermediate Voltage CH2

OR1:

Offset Range CH1 (coarse)

OF1:

Offset Factor CH1 (fine)

OR2:

Offset Range CH2 (coarse)

OF2:

Offset Factor CH2 (fine)

PH12:

Phase Correction CH1 vs. CH2

Signal Conditioning CH0 (X1, X2) . . . . . . . . . Page 26

GR0:

Gain Range CH0 (coarse)

GF0:

Gain Factor CH0 (fine)

VOS0: Offset Reference Source CH0

OR0:

Offset Range CH0 (coarse)

OF0:

Offset Factor CH0 (fine)

Signal Level Controller . . . . . . . . . . . . . . . . . . . Page 27

ADJ:

Setup of ACO Output Function

Error Monitoring and Alarm Output . . . . . . Page 28

EPH:

I/O Logic Alarm Output ERR

EMTD: Min. Indication Time Alarm Outp. ERR

EPU:

Pull-Up Enable Alarm Output ERR

EMASKA: Error Mask Alarm Output ERR

EMASKO: Error Mask Driver Shutdown

EMASKE: Error Mask EEPROM Savings

ERR1:

ERR2:

ERR3:

Error Protocol: First Error

Error Protocol: Last Error

Error Protocol: History

PDMODE: Driver Activation

▷