HCPL-810J Datasheet, PDF (5/16 Pages) Agilent(Hewlett-Packard) – PLC Powerline DAA IC

Regulatory Information
The HCPL-810J is pending for approval by the following organizations:
IEC/EN/DIN EN 60747- 5- 2
UL
Approved under:
Recognized under UL 1577,
IEC 60747-5-2:1997 + A1:2002
component recognition program,
EN 60747-5-2:2001 + A1:2002
File E55361.
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01
with VIORM = 891 Vpeak.
CSA
Approved under CSA
Acceptance Notice #5,
File CA 88324.
IEC/EN/DIN EN 60747-5-2 Insulation Characteristics ⁽¹⁾
Description
Symbol
Characteristic Unit
Installation classification per DIN VDE 0110/1.89, Table 1
For rated mains voltage ≤ 150 Vrms
For rated mains voltage ≤ 300 Vrms
For rated mains voltage ≤ 600 Vrms
Climatic Classification
I – IV
I – III
I – II
55/100/21
Pollution Degree (DIN VDE 0110/1.89)
2
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b ⁽²⁾
V_IORM
V_IORM x 1.875 = V_PR, 100% Production Test with t_m = 1 sec,
V_PR
Partial Discharge < 5 pC
Input to Output Test Voltage, Method a ⁽²⁾
V_IORM x 1.5 = V_PR, Type and Sample Test, t_m = 60 sec,
V_PR
Partial Discharge < 5 pC
Highest Allowable Over-voltage ⁽²⁾
(Transient Over-voltage t_ini = 10 sec)
V_IOTM
Safety-limiting values − maximum values allowed in the event of a failure
Case Temperature
Control Side Power ⁽³⁾
Line Side Power ⁽³⁾
T_S
P_{S, INPUT}
P_{S, OUTPUT}
Insulation Resistance at T_S, V_IO = 500 V
R_S
Notes:
1. Isolation characteristics are guaranteed only within the safety maximum ratings that
1600
must be ensured by protective circuits in application. Surface mount classification is class
1400
A in accordance with CECCOO802.
2. Refer to the optocoupler section of the Isolation and Control Component Designer’s
1200
Catalog, under Product Safety Regulations section, (IEC/EN/DIN EN 60747-5-2) for a
1000
detailed description of Method a and Method b partial discharge test profiles.
3. Refer to the following figure for dependence of P_{S, INPUT} and P_{S, OUTPUT} on case
800
temperature.
600
891
1670
1336
6000
175
400
1500
>10⁹
V_PEAK
V_PEAK
V_PEAK
V_PEAK
°C
mW
mW
Ω
P_{S, OUTPUT}
P_{S, INPUT}
400
200
0
0 25 50 75 100 125 150 175 200
T_S – CASE TEMPERATURE – °C
5