RFM31 Datasheet, PDF (68/137 Pages) –

RFM31
Register 06h. Interrupt Enable 2
Bit
Name
Type
D7
enswdet
R
D6
enpreaval
R
D5
enpreainval
R
D4
enrssi
R
Reset value = 00000011
D3
enwut
R/w
D2
enlbd
R/w
D1
enchiprdy
R/w
D0
enpor
R/w
Bit
Name
Function
Enable Sync Word Detected.
7
enswdet
When mpreadet =1 the Preamble Detected Interrupt will be enabled.
Enable Valid Preamble Detected.
6
enpreaval
When mpreadet =1 the Valid Preamble Detected Interrupt will be enabled.
Enable Invalid Preamble Detected.
5
enpreainval
When mpreadet =1 the Invalid Preamble Detected Interrupt will be enabled.
Enable RSSI.
4
enrssi
When set to 1 the RSSI Interrupt will be enabled.
Enable Wake-Up Timer.
3
enwut
When set to 1 the Wake-Up Timer interrupt will be enabled.
Enable Low Battery Detect.
2
enlbd
When set to 1 the Low Battery Detect interrupt will be enabled.
Enable Module Ready (XTAL).
1
enchiprdy
When set to 1 the Module Ready interrupt will be enabled.
Enable POR.
0
enpor
When set to 1 the POR interrupt will be enabled.
68
Tel: [phone] Fax: [phone] E-mail: [e-mail] http://www.hoperf.com