MB82DP02183C-65L Datasheet, PDF (8/32 Pages) Fujitsu Component Limited. – 32M Bit (2 M word × 16 bit) Mobile Phone Application Specific Memory

MB82DP02183C-65L
■ ELECTRICAL CHARACTERISTICS
(At recommended operating conditions unless otherwise noted.)
1. DC CHARACTERISTICS
Parameter
Symbol
Test conditions
Input Leakage Current
Output Leakage Current
ILI
VSS ≤ VIN ≤ VDD
ILO
0 V ≤ VOUT ≤ VDD,
Output Disable
Value
Unit
Min Max
−1.0 +1.0 µA
−1.0 +1.0 µA
Output High Voltage Level
Output Low Voltage Level
VDD Power Down Current
VDD Standby Current
VOH
VOL
IDDPS
IDDP4
IDDP8
IDDS
IDDS1
VDD = VDD Min, IOH = −0.5 mA
IOL = 1 mA
VDD = VDD (26) Max,
VIN = VIH or VIL,
CE2 ≤ 0.2 V
SLEEP
4M-bit partial
8M-bit partial
VDD = VDD (26) Max, VIN = VIH or VIL,
CE1 = CE2 = VIH
VDD = VDD (26) Max,
VIN ≤ 0.2 V or VIN ≥ VDD − 0.2 V,
CE1 = CE2 ≥ VDD − 0.2 V
2.4
⎯
V
⎯
0.4
V
⎯
10 µA
⎯
40 µA
⎯
50 µA
⎯
1.5 mA
⎯
80 µA
VDD Active Current
IDDA1
IDDA2
VDD = VDD (26) Max,
VIN = VIH or VIL,
CE1 = VIL and CE2 = VIH,
IOUT = 0 mA
tRC/tWC = Min
tRC/tWC = 1 µs
⎯
30 mA
⎯
3
mA
VDD Page Read Current
IDDA3
VDD = VDD (26) Max, VIN = VIH or VIL,
CE1 = VIL and CE2 = VIH,
IOUT = 0 mA, tPRC = Min
⎯
10 mA
Notes : • All voltages are referenced to VSS.
• IDD depends on the output termination, load conditions, and AC characteristics.
• After power on, initialization following POWER-UP timing is required. DC characteristics are guaranteed
after the initialization.
8