MB82DP02183F Datasheet, PDF (6/32 Pages) Fujitsu Component Limited. – MEMORY Mobile FCRAM CMOS 32 M Bit (2 M word x 16 bit) Mobile Phone Application Specific Memory

MB82DP02183F-65L
■ ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Symbol
Unit
Min
Max
Power Supply Voltage*
VDD
− 0.5
+ 3.6
V
Input Voltage*
VIN
− 0.5
+ 3.6
V
Output Voltage*
VOUT
− 0.5
+ 3.6
V
Short Circuit Output Current
IOUT
− 50
+ 50
mA
Storage Temperature
TSTG
− 55
+ 125
o_C
* : All voltages are referenced to VSS.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING CONDITIONS
Parameter
Value
Symbol
Unit
Min
Max
Power Supply Voltage*¹
VDD
2.6
VSS
0
3.1
V
0
V
Input High Voltage *^1, *²
VIH
VDD × 0.8
VDD + 0.2
V
Input Low Voltage *^1, *³
VIL
− 0.3
VDD × 0.2
V
Ambient Temperature
TA
0
+ 70
°C
*1 : All voltages are referenced to VSS.
*2 : Maximum DC voltage on input or I/O pins is VDD + 0.2 V. During voltage transitions, inputs may overshoot to
VDD + 1.0 V for periods of up to 5 ns.
*3 : Minimum DC voltage on input or I/O pins is -0.3 V. During voltage transitions, inputs may undershoot VSS to
-1.0 V for periods of up to 5 ns.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
representatives beforehand.
■ PACKAGE PIN CAPACITANCE
Parameter
Address Input Capacitance
Control Input Capacitance
Data Input/Output Capacitance
Symbol Test conditions
Min
CIN1
VIN = 0 V
⎯
CIN2
VIN = 0 V
⎯
CIO
VIO = 0 V
⎯
(f = 1 MHz, TA = +25 °C)
Value
Typ
Unit
Max
⎯
5
pF
⎯
5
pF
⎯
8
pF
6
DS05-11460-1E