MB82DBS02163D-70L Datasheet, PDF (17/57 Pages) Fujitsu Component Limited. – 32 M Bit (2 M word×16 bit) Mobile Phone Application Specific Memory

MB82DBS02163D-70L
■ ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Symbol
Unit
Min
Max
Voltage of VDD Supply Relative to VSS *
VDD
− 0.5
+ 2.6
V
Voltage at Any Pin Relative to VSS *
VIN, VOUT
− 0.5
+ 2.6
V
Short Circuit Output Current *
IOUT
− 50
+ 50
mA
Storage Temperature
TSTG
− 55
+ 125
°C
* : All voltages are referenced to VSS = 0 V.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING CONDITIONS
Parameter
Value
Symbol
Unit
Min
Max
Power Supply Voltage*¹
VDD
1.7
VSS
0
1.95
V
0
V
High Level Input Voltage*^1, *²
VIH
VDD × 0.8
VDD + 0.2
V
Low Level Input Voltage*^1, *³
VIL
− 0.3
VDD × 0.2
V
Ambient Temperature
TA
− 10
+ 70
°C
*1 : All voltages are referenced to VSS = 0 V.
*2 : Maximum DC voltage on input and I/O pins is VDD + 0.2 V. During voltage transitions, inputs may overshoot to
VDD + 1.0 V for periods of up to 5 ns.
*3 : Minimum DC voltage on input or I/O pins is -0.3 V. During voltage transitions, inputs may undershoot VSS to
-1.0 V for periods of up to 5 ns.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
■ PACKAGE PIN CAPACITANCE
Parameter
Address Input Capacitance
Control Input Capacitance
Data Input/Output Capacitance
Symbol
Test
conditions
Min
CIN1
VIN = 0 V
⎯
CIN2
VIN = 0 V
⎯
CI/O
VIO = 0 V
⎯
(f = 1 MHz, TA = + 25 °C)
Value
Typ
Unit
Max
⎯
5
pF
⎯
5
pF
⎯
8
pF
17