MB86612 Datasheet, PDF (14/40 Pages) Fujitsu Component Limited. – IEEE 1394 Bus Controller (for MPEG, DVC)

MB86612
s ABSOLUTE MAXIMUM RATINGS
Parameter
Power supply voltage*¹
Input voltage*¹
Output voltage*¹
Strage temperature
Operating temperature*²
Output current*³
Overshoot*⁴
Undershoot*⁴
Symbol
VDD
VI
VO
Tst
Top
IO
—
—
Rating
Min.
Max.
VSS – 0.5
4.0
VSS – 0.5
VDD + 0.5
VSS – 0.5
VDD + 0.5
–55
+125
–40
+85
–14
+14
—
VDD + 1.0
—
VSS – 1.0
Unit
V
V
V
°C
°C
mA
V
V
*1: Voltage values are based on Vss = 0 V.
*2: Not warranted for continuous operation.
*3: Normal output current flow (Minimum at Vo = 0 V, maximum at Vo = VDD).
*4: 50 ns or less.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Value
Symbol
Unit
Min.
Max.
Power supply voltage*
VDD
3.0
3.6
V
“H” level input voltage
CMOS input
VIH
VDD × 0.65
VDD
V
“L” level input voltage
CMOS input
VIL
VSS
VDD × 0.25
V
Differential input voltage
(for data transfer)
Cable input
VID
142
260
mV
Differential input voltage
(for arbitration)
Cable input
VIDA
173
260
mV
Common mode input voltage Cable input
VCM
1.165
2.515
V
Receiving input jitter
Cable input
—
—
1.08
ns
Receiving input skew
Cable input
—
—
0.8
ns
Output current
CMOS output
IOH/IOL
–4
TPBIAS
Iot
–2
4
mA
10
mA
Operating temperature
Ta
0
+70
°C
* : Voltage values are based on Vss = 0 V.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
14