DS_FT313H Datasheet, PDF (37/64 Pages) Future Technology Devices International Ltd. – The FT313H is a Hi-Speed Universal Serial Bus (USB) Host Controller compatible with Universal Serial Bus Specification Rev 2.0 and supports data transfer speeds of up to 480M bit/s.

Document No.: FT_000589
FT313H USB2.0 HS Host Controller Datasheet Version 1.1
Clearance No.: FTDI# 318
Bit
Name
0
MSOFINT
Type
Default value Description
0: No SOF event has occurred.
1: SOF event has occurred.
R/WC 1’b0
uSOF interrupt
The INT line will be asserted if the
respective enable bit in the HCINTEN
register is set.
0: No uSOF event has occurred.
1: uSOF event has occurred.
Table 5-24 HC interrupt status register
5.4.2 HCINTEN register (address = A4h)
Bit
Name
Type Default value Description
[15: 8] Reserved
RO
10’b0
-
7
WAKEUPINT_EN R/W 1’b0
Wake up interrupt enable on device
connect or disconnect
Control the INT generation when the device
connects or disconnects as wake up events.
0: No INT will be generated when device
connects or disconnects as wake up events.
1: INT will be asserted when device connects
or disconnects as wake up events.
6
OCINT_EN
R/W 1’b0
Overcurrent interrupt enable
Control the INT generation when the
overcurrent event triggers
0: No INT will be generated after overcurrent
event is triggered.
1: INT will be asserted after overcurrent event
is triggered.
5
CLKREADY_EN
R/W 1’b0
Clock ready enable
Control the INT generation when the internal
clock signals are running stable
0: No INT will be generated after clock runs
stable.
1: INT will be asserted after clock runs stable.
4
R/W 1’b0
BUSINACTIVE_EN
USB Bus inactive enable
Control the INT generation when the USB bus
is inactive
0: No INT will be generated when the USB bus
is inactive.
1: INT will be asserted when the USB bus is
inactive.
3
R/W 1’b0
Remote wake up interrupt enable
Copyright © 2012 Future Technology Devices International Limited
37