DS_FT313H Datasheet, PDF (33/64 Pages) Future Technology Devices International Ltd. – The FT313H is a Hi-Speed Universal Serial Bus (USB) Host Controller compatible with Universal Serial Bus Specification Rev 2.0 and supports data transfer speeds of up to 480M bit/s.

Document No.: FT_000589
FT313H USB2.0 HS Host Controller Datasheet Version 1.1
Clearance No.: FTDI# 318
5.3.6 MEMADDR register (address = 90h)
Bit
Name
Type Default value Description
[15: 0] START_ADDR_MEM R/W 16’b0
Table 5-17 Memory address register
Start address for memory read / write
Internal 24K RAM memory address from
0x0000 to 0x5FFF.
Used by PIO and DMA.
5.3.7 DATAPORT register (address = 92h)
Bit
Name
Type Default value Description
[15: 0] DATA_PORT
R/W 16’b0
Table 5-18 Data port register
Data port
Read / write data from / to memory must go
through this port.
Used by PIO and DMA.
5.3.8 DATASESSION register (address = 94h)
Bit
Name
Type Default value Description
15
MEM_RW
R/W 1’b0
Memory read or write
0: Write data into memory
1: Read data from memory
Used by PIO and DMA
[14: 0] DATA_LEN
R/W 15’b0
Table 5-19 Data session length register
Data length for memory read or write
Preset the data length for memory read/write.
The max data length is 24K.
Used by PIO and DMA
5.3.9 CONFIG register (address = 96h)
Bit
Name
Type Default value Description
15
BCD_MODE_CTRL R/W 1’b0
BCD Mode override control
0: External CPE0 and CPE1 pins configuration
take effect.
1: BCD_MODE [1:0] register bits take effect
[14:13] BCD_MODE[1:0]
R/W 2’b00
BCD Mode setting
00: SDP
Standard downstream port, VBUS
current limit ≥ 500mA.
01: DCP
Copyright © 2012 Future Technology Devices International Limited
33