MC9S08MP16VLF Datasheet, PDF (6/37 Pages) Freescale Semiconductor, Inc – DEMO9S08MP16 User Manual

• P&E Embedded Multilink Toolkit applications
• P&E Embedded Multilink driver installation guide and resources
1.5
Handling Precautions
Take care to handle the package contents in a manner such as to prevent
electrostatic discharge.
2 HARDWARE FEATURES
The DEMO9S08MP16 is a demonstration and development system for
Freescale’s MC9S08MP16 microcontrollers. Application development is quick
and easy using P&E’s Embedded Multilink circuitry and the included software
tools and examples. An optional BDM port is provided to allow the use of an
external BDM interface such as P&E’s Cyclone PRO automated programmer
or USB Multilink. The USB Multilink is functionally comparable to the
DEMO9S08MP16’s Embedded Multilink circuitry.
Note: The DEMO board’s onboard Embedded Multilink circuitry is intended to
function with the onboard processor only. It cannot be used to communicate
with other devices.
2.1
DEMO9S08MP16 Features
• On-board Logic Analyzer
• On-board Virtual Serial Port
• P&E’s Embedded Multilink circuitry populated on the underside
• SCI signals connected to P&E’s Embedded Multilink through jumpers
• ON/OFF Power Switch (and power input source selector) w/ LED
indicator
• A 6VDC power supply input barrel connector
• Power Input Selection Jumpers for selecting the input voltage source:
• 5V from Embedded Multilink or LDO regulator
• Power from APMOTOR Port which might be 5V or 3.3V
• RESET Push Button and LED indicator w/ Enable
2
DEMO9S08MP16 User Manual