MC9S08MP16VLF Datasheet, PDF (32/37 Pages) Freescale Semiconductor, Inc – DEMO9S08MP16 User Manual

HC(S)12(X) microcontroller families
• Communication via USB, Serial, and Ethernet Ports
• Multiple image storage
• LCD screen menu interface
• Supported by P&E software and Freescale’s CodeWarrior
9.2
Working With P&E’s USB Multilink
9.2.1
9.2.2
28
Figure 9-1: P&E’s USB Multilink (USB-ML-12 shown)
Product Features & Implementation
P&E’s USB Multilink Interface (USB-ML-12) connects your target to your PC
and allows the PC access to the Background Debug Mode (BDM) on
Freescale’s ColdFireV1, HCS08, RS08, and HC(S)12(X) microcontrollers. It
connects between a USB port on a Windows 2000/XP/2003/Vista machine
and a standard 6-pin debug connector on the target.
By using the USB Multilink Interface, the user can take advantage of the
background debug mode to halt normal processor execution and use a PC to
control the processor. The user can then directly control the target’s
execution, read/write registers and memory values, debug code on the
processor, and program internal or external FLASH memory devices.The
USB Multilink enables you to debug, program, and test your code on your
board.
Software
The USB Multilink Interface works with Codewarrior as well as P&E’s in-circuit
debugger and flash programmer to allow debug and flash programming of the
target processor. P&E’s USB Multilink Development Packages come with the
DEMO9S08MP16 User Manual