MC9S08MP16VLF Datasheet, PDF (35/37 Pages) Freescale Semiconductor, Inc – DEMO9S08MP16 User Manual

10.2
5. The "P&E Multilink" device will be shown with an exclamation mark
next to it. Double-click this device.
6. Click the "Reinstall Driver…" button and follow the dialog instructions
to have Windows automatically install the driver.
(B) Re-Install the USB driver
If the Multilink device does not show up in the device manager, use the driver
installation utility located in the DEMO9S08MP16 Resources on the DVD-
ROM. After driver installation, unplug the DEMO9S08MP16 from the PC and
reboot the PC. When the reboot has completed, connect the interface to the
PC with the USB 2.0 cable. Run the software again to see if the interface is
now detected.
If you have an error attempting to install the drivers, please view the
installation troubleshooting FAQ on P&E’s website at:
http://www.pemicro.com/faqs/faq_view.cfm?id=89.
(C) Test for installation of the USB driver files
To test the driver installation, use the driver test utility in the DEMO9S08MP16
Resources of the DVD-ROM to make sure all files were properly installed.
This may give some indication of what the problem is.
(D) Using a USB Hub
The DEMO9S08MP16 is a high-power USB device. If a USB Hub is used, it
must be a self-powered hub (i.e., with its own power supply). If the Hub is not
self-powered the DEMO9S08MP16 will not work. In general, USB ports
located directly on the PC are high-power (self-powered) ports.
CodeWarrior Installation Fails (WinDriver Error)
Q: When I try to install the Codewarrior or P&E software, installation fails with
this message: “There are currently 2 open applications using WinDriver.
Please close all applications and press Retry. To reload WinDriver, press
Cancel and reboot.” How do I solve this?
A: Some software applications on your PC are connected to the WinDriver
system driver which manages P&E's USB connections. This system driver
needs to be disabled for the installation to continue. Directions to disable
Windriver are as follows:
In Windows Explorer, right-click on My Computer and select Properties from
the drop-down menu.
DEMO9S08MP16 User Manual
31