33894 Datasheet, PDF (6/28 Pages) Freescale Semiconductor, Inc – Quad High-Side Switch

ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 3. Static Electrical Characteristics
Characteristics noted under conditions 4.5 V ≤ V_DD ≤ 5.5 V, 6.0 V ≤ V_PWR ≤ 27 V, -40°C ≤ T_J ≤ 150°C unless otherwise noted.
Typical values noted reflect the approximate parameter means at T_A = 25°C under nominal conditions unless otherwise noted.
Characteristic
Symbol
Min
Typ
Max
Unit
POWER INPUT
Battery Supply Voltage Range
Fully Operational
V_PWR
V
6.0
–
27
VPWR Operating Supply Current
Outputs ON, HS[0 : 3] Open
I_PWR(ON)
–
mA
–
20
VPWR Supply Current
I_PWR(SBY)
Outputs OFF, Open Load Detection Disabled, WAKE > 0.7 V_DD,
RST = V_{LOGIC HIGH}
–
mA
–
5.0
Sleep State Supply Current (V_PWR < 14 V, RST < 0.5 V, WAKE < 0.5 V) ^I_PWR(SLEEP)
T_J = 25°C
–
T_J = 85°C
–
µA
–
10
–
50
VDD Supply Voltage
VDD Supply Current
No SPI Communication
3.0 MHz SPI Communication
VDD Sleep State Current
Overvoltage Shutdown Threshold
Overvoltage Shutdown Hysteresis
Undervoltage Shutdown Threshold ⁽⁷⁾
V_DD(ON)
4.5
5.0
5.5
V
I_DD(ON)
–
–
mA
–
1.0
–
5.0
I_DD(SLEEP)
–
–
5.0
µA
V_PWR(OV)
28
32
36
V
V_PWR(OVHYS)
0.2
0.8
1.5
V
V_PWR(UV)
4.75
5.25
5.75
V
Undervoltage Hysteresis ⁽⁸⁾
V_PWR(UVHYS)
–
0.25
–
V
Undervoltage Power-ON Reset
V_PWR(UVPOR)
–
–
5.0
V
Notes
7. Output will automatically recover to instructed state when V_PWR voltage is restored to normal so long as the V_PWR degradation level
did not go below the undervoltage power-ON reset threshold. This applies to all internal device logic that is supplied by V_PWR and
assumes that the external V_DD supply is within specification.
8. This applies when the undervoltage fault is not latched (IN[0:3] = 0).
33894
6
Analog Integrated Circuit Device Data
Freescale Semiconductor