908E624_10 Datasheet, PDF (5/40 Pages) Freescale Semiconductor, Inc – Integrated Triple High Side Switch with Embedded MCU and LIN Serial Communicationfor Relay Drivers

ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
Table 2. Maximum Ratings
All voltages are with respect to ground unless otherwise noted. Exceeding limits on any terminal may cause permanent
damage to the device.
ELECTRICAL RATINGS
Rating
Symbol
Value
Unit
Supply Voltage
V
Analog Chip Supply Voltage under Normal Operation (Steady-State)
Analog Chip Supply Voltage under Transient Conditions
MCU Chip Supply Voltage
V_SUP(SS)
V_SUP(PK)
V_DD
- 0.3 to 27
- 0.3 to 40
- 0.3 to 5.5
Input Terminal Voltage
Analog Chip
Microcontroller Chip
V
V_{IN (ANALOG)}
V_{IN (MCU)}
- 0.3 to V_DD +0.3
V_SS-0.3 to V_DD+0.3
Maximum Microcontroller Current per Terminal
All Terminals except VDD, VSS, PTA0:PTA6 , PTC0:PTC1
PTA0:PTA6, PTC0:PTC1 Terminals
I_PIN(1)
I_PIN(2)
mA
±15
± 25
Maximum Microcontroller VSS Output Current
I_MVSS
100
mA
Maximum Microcontroller VDD Input Current
I_MVDD
100
mA
Current Sense Operational Amplifier
Maximum Input Voltage, +E, -E Terminals
Maximum Input Current, +E, -E Terminals
Maximum Output Voltage, OUT Terminal
Maximum Output Current, OUT Terminal
V _{+ E-E}
I _{+ E-E}
V_OUT
I_OUT
- 0.3 to 7.0
V
± 20
mA
-0.3 to V_CC+0.3
V
± 20
mA
LIN Supply Voltage
V
Normal Operation (Steady-State)
Transient Input Voltage (per ISO7637 Specification) and with
External Components (Figure 4, page 15)
V_BUS(SS)
V_BUS(PK)
-18 to 40
-150 to 100
L1 and L2 Terminal Voltage
V
Normal Operation with a 33 kΩ resistor (Steady-State)
Transient Input Voltage (per ISO7637 Specification) and with
External Components (Figure 4, page 15)
V_WAKE(SS)
V_WAKE(PK)
-18 to 40
-100 to 100
ESD Voltage
Human Body Model ⁽¹⁾
Machine Model ⁽¹⁾
Charge Device Model ⁽¹⁾
V_ESD1
V_ESD2
V_ESD3
V
± 2000
±100
± 500
Notes
1. ESD1 testing is performed in accordance with the Human Body Model (C_ZAP = 100 pF, R_ZAP = 1500 Ω), the Machine Model (C_ZAP =
200 pF, R_ZAP = 0 Ω), and the Charge Device Model, Robotic (C_ZAP = 4.0 pF).
Analog Integrated Circuit Device Data
Freescale Semiconductor
908E624
5