K11P80M50SF4 Datasheet, PDF (48/54 Pages) Freescale Semiconductor, Inc – K11 Sub-Family Data Sheet

Dimensions
I2S_TX_BCLK/
I2S_RX_BCLK (input)
I2S_TX_FS/
I2S_RX_FS (output)
I2S_TX_FS/
I2S_RX_FS (input)
I2S_TXD
I2S_RXD
S11
S12
S15
S13
S19
S15
S12
S15
S16
S17
S18
Figure 21. I2S/SAI timing — slave modes
S16
S14
S16
7 Dimensions
7.1 Obtaining package dimensions
Package dimensions are provided in package drawings.
To find a package drawing, go to www.freescale.com and perform a keyword search for
the drawing’s document number:
If you want the drawing for this package
80-pin LQFP
Then use this document number
98ASS23174W
8 Pinout
8.1 K11 Signal Multiplexing and Pin Assignments
The following table shows the signals available on each pin and the locations of these
pins on the devices supported by this document. The Port Control Module is responsible
for selecting which ALT functionality is available on each pin.
NOTE
• The analog input signals ADC0_SE10, ADC0_SE11,
ADC0_DP1, and ADC0_DM1 are available only for K11,
K11 Sub-Family Data Sheet Data Sheet, Rev. 3, 08/2012.
48
Freescale Semiconductor, Inc.