K20P120M100SF2 Datasheet, PDF (40/66 Pages) Freescale Semiconductor, Inc – K20 Data Sheet

Peripheral operating requirements and behaviors
Table 28. 16-bit ADC characteristics (V_REFH = V_DDA, V_REFL = V_SSA) (continued)
Symbol Description
Conditions¹
Min.
Typ.²
Max.
Unit
Notes
V_TEMP25 Temp sensor
voltage
25 °C
—
719
—
mV
1. All accuracy numbers assume the ADC is calibrated with V_REFH = V_DDA
2. Typical values assume V_DDA = 3.0 V, Temp = 25°C, f_ADCK = 2.0 MHz unless otherwise stated. Typical values are for
reference only and are not tested in production.
3. The ADC supply current depends on the ADC conversion clock speed, conversion rate and the ADLPC bit (low power).
For lowest power operation the ADLPC bit must be set, the HSC bit must be clear with 1 MHz ADC conversion clock
speed.
4. 1 LSB = (V_REFH - V_REFL)/2^N
5. ADC conversion clock < 16 MHz, Max hardware averaging (AVGE = %1, AVGS = %11)
6. Input data is 100 Hz sine wave. ADC conversion clock < 12 MHz.
7. Input data is 1 kHz sine wave. ADC conversion clock < 12 MHz.
Figure 13. Typical ENOB vs. ADC_CLK for 16-bit differential mode
K20 Data Sheet Data Sheet, Rev. 6.1, 08/2012.
40
Freescale Semiconductor, Inc.