MC9S08DE60 Datasheet, PDF (376/412 Pages) Freescale Semiconductor, Inc – Microcontrollers

Appendix A Electrical Characteristics
Table A-7. Supply Current Characteristics (continued)
Num C
Parameter
Symbol V_DD (V) Typical¹
Max²
Unit
Stop2 mode
P^{4 supply}
current
–40 °C (C, V, & M suffix)
0.8
—
P⁴
25 °C (All parts)
5
0.9
—
P
105 °C (V suffix only)
25
37
5
P
125 °C (M suffix only) S2I_DD
46
70
μA
C
–40 °C (C, V, & M suffix)
0.7
—
C
25 °C (All parts)
3
0.8
—
C
105 °C (V suffix only)
20
30
C
125 °C (M suffix only)
RTC adder to stop2 or stop3⁵, 25°C
6
C
40
5
300
3
300
60
—
nA
—
nA
LVD adder to stop3 (LVDE = LVDSE = 1)
7
C
5
110
3
90
—
μA
—
μA
Adder to stop3 for oscillator enabled⁶
8
C (IRCLKEN = 1 and IREFSTEN = 1 or
ERCLKEN = 1 and EREFSTEN = 1)
5
5
3
5
—
μA
—
μA
1 _{Typicals are measured at 25°C, unless otherwise noted.}
2 _{Maximum values in this column apply for the full operating temperature range of the device unless otherwise noted.}
3 _{All modules except ADC active, MCG configured for FBE, and does not include any dc loads on port pins}
4 _{Stop currents are tested in production for 25°C on all parts. Tests at other temperatures depend upon the part number}
suffix and maturity of the product. Freescale may eliminate a test insertion at a particular temperature from the
production test flow once sufficient data has been collected and is approved.
5 _{Most customers are expected to find that auto-wakeup from stop2 or stop3 can be used instead of the higher current}
wait mode.
6 _{Values given under the following conditions: low range operation (RANGE = 0), low power mode (HGO = 0).}
MC9S08DE60 Series Data Sheet, Rev. 3
376
Freescale Semiconductor