|
MC9S12P64CFT Datasheet, PDF (155/566 Pages) Freescale Semiconductor, Inc – Microcontrollers | |||
|
◁ |
Chapter 6
S12S Debug Module (S12SDBGV2)
Table 6-1. Revision History
Revision Number
02.07
02.08
02.09
Revision
Date
13.DEC.2007
09.MAY.2008
29.MAY.2008
Sections
Affected
6.5
General
6.4.5.4
Summary of Changes
Added application information
Spelling corrections. Revision history format changed.
Added note for end aligned, PurePC, rollover case.
6.1 Introduction
The S12SDBG module provides an on-chip trace buffer with ï¬exible triggering capability to allow non-
intrusive debug of application software. The S12SDBG module is optimized for S12SCPU debugging.
Typically the S12SDBG module is used in conjunction with the S12SBDM module, whereby the user
conï¬gures the S12SDBG module for a debugging session over the BDM interface. Once conï¬gured the
S12SDBG module is armed and the device leaves BDM returning control to the user program, which is
then monitored by the S12SDBG module. Alternatively the S12SDBG module can be conï¬gured over a
serial interface using SWI routines.
6.1.1 Glossary Of Terms
COF: Change Of Flow. Change in the program ï¬ow due to a conditional branch, indexed jump or interrupt.
BDM: Background Debug Mode
S12SBDM: Background Debug Module
DUG: Device User Guide, describing the features of the device into which the DBG is integrated.
WORD: 16 bit data entity
Data Line: 20 bit data entity
CPU: S12SCPU module
DBG: S12SDBG module
POR: Power On Reset
Tag: Tags can be attached to CPU opcodes as they enter the instruction pipe. If the tagged opcode reaches
the execution stage a tag hit occurs.
S12P-Family Reference Manual, Rev. 1.13
Freescale Semiconductor
155
|
▷ |