|
33813 Datasheet, PDF (10/54 Pages) Freescale Semiconductor, Inc – One Cylinder Small Engine Control IC | |||
|
◁ |
4.2 Static Electrical Characteristics
Table 4. Power Input Static Electrical Characteristics
Characteristics noted under conditions of 6.0 V ï£ VPWR ï£ 18 V, -40 ï°C ï£ TC ï£ 125 ï°C, and Calibrated Timers, unless otherwise
noted. Where applicable, typical values reflect the parameterâs approximate average value with VPWR = 13 V, TA = 25 ï°C.
Characteristic
Symbol
Min
Typ
Max
Unit
POWER INPUT (VPWR)
Supply Voltage (measured at VPWR pin)(6)
⢠Logic Stable Range
⢠Full Operational Range
⢠Full Parameter Specification Range
V
VPWR (FO)
2.5
â
45
VPWR (FO)
4.5
â
36
VPWR (FP)
6.0
â
18
Supply Current
IVPWR (ON)
⢠All Outputs Disabled (Normal Mode). Excludes base current to the external
â
PNO.
mA
10.0
14.0
Sleep State Supply Current (Must have PWREN & KEYSW ï£ 0.8 V for sleep
IVPWR (SS)
state),
â
⢠VPWR = 18 V
ïA
10
20
VPWR Over-voltage Shutdown Threshold Voltage (OV Reset)(7)
VPWR(OV)
37.5
39
42
V
VPWR Over-voltage Shutdown Hysteresis Voltage
VCC Power On Reset Voltage Threshold (POR Power On Reset), rising VT
VPWR
0.5
1.5
3.0
V
(OV-HYS)
VCC(POR)
3.9
4.5
4.9
V
VCC Under-voltage Shutdown Threshold Voltage (UV Reset)(8), falling VT
VCC(UV)
2.9
3.7
3.9
V
VCC POR and Under-voltage Shutdown Hysteresis Voltage
VCC POR and Under-voltage Non-overlap (POR-UV)
VOLTAGE PRE- REGULATOR OUTPUT (VPPREF, VPPSENS)
VCC(UV/POR-
100
â
HYS)
â
mV
VCC,
0.8
1.0
1.2
V
NONOVERLAP
VPPREF Output Voltage (measured with VPPREF shorted to VPPSENS and no
VPPREF
5.85
6.5
7.15
V
external output transistor)
VPPREF Output Current (includes external PNP current)
IVPPREF
â
-5.0
â
mA
VPPREF Current Limit (VPWR-VPP = 5.5 V TJ = 25 °C)
IVPPCL
-5
-15
-20
mA
Output Capacitance External (ceramic)
VOCE
2.2
â
25
ïF
VPPSENS Input Current (VPWR-VPP = 5.5 V TJ=25 °C)
IVPPSENS
â
â
3.0
mA
Line Regulation IVCC = 100 mA, IVPROT = 50 mA 9.0 V< VPWR < 18 V and Diodes REGLINE_VPP
â
Inc. FZT753TA PNP
2.0
25
mV
Dropout Voltage (Minimal Input/Output Voltage, tracks input below)
IVCC = 100 mA, IVPROT = 50 mA and Diodes Inc. FZT753TA PNP
VOLTAGE REGULATOR OUTPUTS (VCC, VPROT)
VDROPOUT_PP
â
1.05
1.4
V
VCC Output Voltage 0 ï£ IVCC ï£ï IVCC_C 6.0 V< VPWR < 18 V
VCC
4.9
5.0
VCC Output Current Continuous
IVCC_C
â
â
Notes
6. Over-voltage thresholds minimum and maximum include hysteresis.
7. Under-voltage thresholds minimum and maximum include hysteresis.
8. Device is functional provided TJ is less than 150 ï°C. Some table parameters may be out of specification.
5.1
V
200
mA
Analog Integrated Circuit Device Dataï
Freescale Semiconductor
33813
10
|
▷ |